Liberty 18-2C-VP-GRY 0-10V Dimmer Cable CMR - 1000 ft

1000 ft spool of Liberty Wire & Cable Dimming Ballast Cable Non-Plenum Riser Rated

Grey OEM Lighting Systems Support Cable for 0-10V LED Ballasts Reel - Non-Plenum

Liberty 18-2C-VP-GRY Features and Benefits

• 2022 NEMA Special color code matching the ballast leads (Violet/Purple and Pink)
• Solid annealed bare copper conductors
• PVC insulation
• Twisted, unshielded
• Riser rated PVC jacket
• NEC CMR, CEC FT4, RoHS compliant
• 1000 foot spools
• Sequential Foot Markers for cable run distance
• Better than Belden 2285R
• Limit to 300 ft runs (Use 16 AWG for longer runs)

Liberty 18-2C-VP-GRY Applications

• Low voltage 0-10V ballast wiring and connection
• Low voltage security and control
• DC power, class 2 and class 3 power
• Non-Plenum Rated Light Dimmer Cable

DALI and DALI-2 Lighting Control Bus Cable

This solid 18 AWG, 2-conductor 0-10V control cable can also be used for appropriately sized DALI and DALI-2 lighting-control bus wiring when its CMR riser-rated rating and installation method meet the project requirements and local electrical code. DALI carries bus power and digital communication on one adjacent pair, and the bus connection is polarity-insensitive.

Run-length guidance: The DALI Alliance recommends 1.5 mm² (15 AWG) two-core cable for up to 300 m (984 ft) between the two farthest devices at the maximum 250 mA bus current. This 18 AWG cable is smaller than the recommended 1.5 mm² conductor and should be used only for appropriately shorter DALI runs; retain the product’s existing 300 ft guidance unless the system designer approves otherwise.

Important: This is bulk cable suitable for DALI bus applications; it is not a DALI-2 certified control device. Use it for the control bus, not branch-circuit power. Verify CMR riser-rated, raceway, separation, and local-code requirements, especially near mains wiring.